markretallack I have one of these sensors, using it with ZHA. It reports 0×00000026 as the firmware version. It is also failing after a day or so. To get it to work again I need to remove and re-insert the battery. The Device is a few meters away from the Zigbee device. The Zigbee device I am using is a Sonoff Zigbee 3.0 USB Dongle Plus and HomeAssistant.
Burren I have the same problem. I have a few of them, most stay connected but others connect for a few minutes then they stop reporting. They are all about the exact same distance from several zigbee repeaters.
dmihaly Same problem, disconnects after a few days, stays disconnected for days, reconnects for a day, then disconnects again.
HoofdletterR I’m experiencing the same issue. I use the sensor with Homey and it disconnects, When that happens, I reset the sensor (long press button) and it reconnects, but after a short while it disconnects again and I have to reset.
patlar Are having the same issue, works fine for few minutes before the issues starts. I saw in another thread about a new firmware verison, when can that one be expected and will that solve these issues?
GaryH I have three of these and every day or so, 1 of these goes offline. the only way I have been able to get them back online is to re-pair. I have about 25 other Zigbee devices and none of them are having any issues. I also have a reliable. Third Reality Night Light. repeater within a few feet of them. The Night Lights do not lose their connectivity.
stevo I am seeing the same behavior with my sensor. Only a battery pull and re-pairing fixes the connection. Would love to but more but this is preventing me from doing so.
rfernberg I bought four of these and am having the same issue on all of them. Z2M says Firmware ID v1.00.38 (N/A) and installed/availible version 0.0.00-0.0.26. I have several main powered zigbee devices close by in the garden.
thehaseebahmed I just moved from ZHA to Z2M on HAOS. Moisture value is not being reported while it was reported fine on ZHA. Not sure what to do 🤔
fbane thehaseebahmed Moisture is being reported as Humidity in HAOS at this time until updates are made.
Masetto Same problem here. I installed 2 of these a few weeks ago through Z2M. The two stopped working simultaneously, a few hours after adding 2 sonoff TRV valves in the same area. I wonder if it’s a coincidence or not.
thehaseebahmed fbane Humidity value is wayyy too low to be moisture 😅 But let me physically check my soil as well, Thanks! UPDATE: Just checked, the soil was dry but pouring 2L of water into it only raised the value from 6 to 14% so something is def. off 🤔
fbane thehaseebahmed If you check the posts around here there is a post that says how to recalibrate it
thehaseebahmed fbane I tried looking but couldn’t find anything like that. Even ChatGPT didn’t come up with anything in particular 😅
cridemichel hi, same problem here, I am using latest firmare 0×0000002e and moisture sensor sends reports for a while and then just stops doing that, getting stuck. Anyone has solution other than sending it back? thank you in advance Cristiano
ejschwartz I am having similar issues. I get readings but then the sensor drops off and never comes back.
